Replacing water filters

Replacing the lower triple filters, known as pre-filters, usually need to be replaced three to four times a year. But in general, this depends on the level of contamination of the incoming water and the amount of water used.
The most important thing when replacing the filter is to drain the black water from the second filter. To drain the black water, you must open the filter chamber number 3 (white on the bottom left) and then open the inlet valve of the device. Place a transparent container such as a pitcher under the opened chamber cap until about 6 liters of black water comes out. After the water becomes clear, close the inlet, then close the chamber in place and restart the device by opening the inlet valve and enjoy drinking purified water.
The filters on the top of the device, other than the membrane, need to be replaced every two years. The life of the membrane filter is not estimated and depends on the level of contamination of the incoming water and the type of operation.

View water purifier filters

Share